There are many skills and techniques that skiers are required to learn to master snowboarding that you may feel like you’re never going to get there. But as long as you consistently practice and take constructive criticism well, there’s no reason why you shouldn’t be the master of the slopes in a few winters. Before you learn to flip, handle high speeds, and perform a 720 spin, you must learn to balance. One of the toughest aspects of performing in any sport is learning how to balance. It doesn’t matter what sport you are practicing; there’s no way you can improve and advance in anything if you don’t know how to balance. And there are different types of balance, so you need to learn all of the different ways to balance correctly. Luckily, there is a great new invention that can help improve your balance when standing on your snowboard while you are not in motion. It is called a snowboard stomp pad.

What Is A Stomp Pad? 

For snowboarding, a person must learn how to balance while in motion. But did you know that snowboarders have to learn how to balance while just standing on the board? If you veer far to the left or right, you Could slip off the snowboard and fall on your face. The snowboard’s surface is extremely slippery, and it becomes even more slippery when it is wet or when it has snow on it. So to prevent excessive injuries and constant slipping and sliding, the stomp pad was created. A stomp pad is a piece of material that Has a lot of friction. The stomp pad’s friction prevents the snowboarder from slipping and sliding off of their snowboard when they are just standing on it.

Although the stomp pad sounds like a tool that only begins with use, skiers of all levels have been using the stomp pad since their invention. Stomp pads do not weigh very much, and they are small. The average size of a stomp pad is about the size of a snowboard boot.

The most common type of stomp pad is a rubber pad because it goes well with the bottom of snowboard boots and creates a lot of traction, so the skier has a lot of stability when they stand up. But there are also other types of stomp pads besides rubber ones. 

What Do You Use A Stomp Pad For?

Besides balance, why use a stomp pad? There are other reasons to use a stomp pad besides balance. One of the reasons is that it helps skiers, especially those who are shorter, get off the ski lift. It is challenging for people to get on the ski lift because the chair is moving, and they need more traction than what the snow can provide. So they unbind one of their boots and step on the stomp pad. When the ski lift comes up behind them, it’s easier for the skier to get on the lift chair.

The Coolest Stomp Pads

Now that you know what a stomp pad is and what they’re used for, you might be interested in getting one! But you don’t have to search around the internet for the best kinds of stomp pads because I’ve done it for you! Here are four stomp pads that look great and are worth their cost.

RaceWax Ten Metal Pyramid Studs

RaceWax Ten Metal Pyramid Studs

For people who want to customize exactly where their stomp pad is and where the traction goes on their boot, you will enjoy this ten metal pyramid studs stomp pad. Each little stud has a sticker backing, and you can place them down wherever you want. If you purchase them on Amazon, you can also order an additional five more in case you need more studs. The design is small and black so they can blend into your board’s design if it has heavy black coloring. The studs are made out of aluminum, so they’re built to last and can take any type of damage or weathering.

Dakine Spike Stomp Stomp Pad

Dakine Spike Stomp Stomp Pad

When you choose to buy anything from the brand Dakine, you know you’re going to get a high-quality item that will be hard to replace. Now. Dakine back again with the spikes stomp pad. It comes as one large pad about the size of a boot. Each section of the stomp pad has spikes to provide traction and mold into the snowboarder’s boot underside. You can customize exactly where the pad goes. This pad is designed to be cut into strips if the snowboarder wishes to place the strips down exactly where they want. 

Toejamr Snowboard Stomp Pad

Toejamr Snowboard Stomp Pad

For the animal lover in you, you’ll enjoy using the snowboard stomp pad by ToeJamr. This pad is designed as a cougar paw, and it has a wonderful black and gray design. Unlike other types of stomp pads, this pad is made of foam. It was made that way because it’s designed to be ultra-light but still provides enough traction to keep you upright on the board. Despite its foam material, this pad[is guaranteed to last about three years. If it does not, the manufacturer has a 3-year warranty, so you can request a new pad completely for free.

How To Install A Stomp Pad 

When you finally find the stomp pad that you want, installing it is a piece of cake. But you must get it right the first time. Before you officially place your stomp pad Security on the board, you need to know the exact area where you like to put your unbound foot. Some people like to put it on the inside between the bindings, and other people like to add it on the outside of the binding near the sides. Double-check the area and make sure there are no holes where you would have to screw in your bindings. Once you know where to put it, make sure to clean the area and remove any dirt or excess wax. 

Take your stomp pad and remove the sticker that is protecting the sticky underside. When you place the entire patted down on the board, do not do it all at once. Start by placing the bottom of the stomp pad on the board’s surface and slowly place the rest of the pad down with a firm hand. This will ensure that there are no air bubbles underneath. 

Some stomp pads require that you warm up the pad before or while you are placing it down on the snowboard. Do not place the pad in the microwave! If you have a hairdryer, you can use it to warm up the pad and the area on the snowboard where you were going to place it. If you do not own a hairdryer, place it in front of a heater for a minute or so.

After the stomp pad is securely placed on the snowboard, place a solid heavy object on top of the pad for an hour to reinforce its placement.

How To Remove A Stomp Pad

Like all snowboarding equipment, the stomp pad on your snowboard will eventually wear out and not provide enough traction to help keep you upright and stable, or the stickiness that keeps it on the board will wear off. When this occurs, it is time to remove your old stomping and put down a new one. 

Just as you warmed up the stomp pad to place it down on the snowboard, You will have to warm up the stomp pad on your snowboard to remove it. Just like before, you can use a hairdryer or a heater to warm it up. When it is warm enough, use your fingernail or base metal flat spatula to slowly peel the stomp pad off your snowboard. Don’t try to rip it off quickly or the sticker will stay attached to the snowboard, and then you will have to force it off. 

If you are going to place a new stomp pad on the area where you just took off your old one, wash and dry the area first. Since the stomp pad was on your snowboard for a long time, you might see that the snowboard colors around the pad have faded slightly, but the colors underneath the pad look brand new. This is regular discoloration from the sun beating down on your snowboard.


When you install a stomp pad on your snowboard, make sure your boots lie flat against the pad. The stomp pad shouldn’t lift off of the board too much, but there is a lot of traction between the pad and the boot. Purchase a pad that is a similar color or a contrasting color to the color of your board, so the colors will still match. Before you put the pad on your snowboard, place it on the floor and stand on top of it while wearing your boots. You should do this to check the pad’s traction against your boots and see if it is what you need. Take time out of your busy skiing schedule and practice getting on and off the ski lift. You’ll be surprised at how many skiers have trouble boarding the chair without falling on their faces.

Harry Sowers

Harry has been skiing and snowboarding since he was a boy growing up outside of Denver Colorado. He is most passionate about skiing and when he was in college a UC Boulder he even participated in the olympic trials for the USA Olympic Downhill Ski team.